Adhesion Promoter | SPI

Adhesion Promoter

Under 2.1 VOC
Ready to spray
Available in Quarts only
Use on TPO, TEO, PE, PP, UR, ABS etc.
“If it floats- Promote!” cut a sliver off the backside of the bumper or plastic, if it floats in the Adhesion Promoter then use Adhesion Promoter
12 month sealed shelf life
Only prep the area with Waternorne WG remover, no solvent based cleaners
Ready to coat after 30 minutes, maximum 1 hour
Top coat with epoxy for best results, at minimum 2k primer

Technical Manual

red-right

red-left

red-right-tab

reb-left-tab

red-right-mobile

reb-left-mobile

cta-right

Premium Coating Manufacturer

As you consider SPI automotive coatings for your next project, you can be certain our 100% MADE IN THE USA products will be comparable or superior in quality to anything available in today’s market – at any price.

Browse Our Products

home-image-cta-car-img

Contact Us

We invite you to experience the SPI difference. We’re confident you’ll agree – SPI is the clear choice. Exceptional QUALITY, extraordinary VALUE and unmatched customer SERVICE.

image-contact-form-image